Kilargo IS5175A
The IS5175A seal is designed with a 45º angle aluminium carrier and is used to prevent draught and dust penetration around the perimeter of roller and tilt-up doors. The angled aluminium carriers can be fitted with either 13mm, 19mm or 25mm black nylon brush. (50mm brush is also available upon request).
Application and selection
Check the product model, dimensions, substrate, service type and installation method against the relevant manufacturer documentation. Fire resistance ratings apply to tested assemblies; they are not a universal rating for the material alone.
- Ambient-temperature smoke sealing
Product specifications
| Gap Size | Min. 15mm / max. 21mm (with 19mm brush insert) (Gap size dependent upon brush size utilised) |
|---|---|
| Standard Lengths | 1000mm, 2250mm. Also available in: 250mm increments from 1000mm to 3000mm (Brush lengths to be confirmed upon placement of order.) |
| Standard Colours | Silver anodised aluminium carrier with black nylon brush |
| Fixing | Brush seals (within carriers) can be screw fixed or self-adhered to the desired surface. Fixing screws and aggressive backing tape are supplied |
Technical documents
Documents are hosted on this website. Original technical, manufacturer, certification and emergency information is retained. Contact AODISI for sales enquiries.
PDF · Download Fact Sheet ↓PDF · Download Installation Sheet ↓Technical documents and related products
Use the Kilargo IS5175A technical documents to check dimensions, installation and suitability. For door gap seals and fire protection profiles selection, compare the following products in the same material category; matching categories do not imply interchangeability.